This is the electrical current required during
normal motor operation to generate its designed
horsepower. Full load current is also known as
full load amps (FLA). A motor’s full load current
is used when selecting motor overload
protection devices.
Subscribe:
Popular Posts
-
A method of reversing motor rotation by the use of two separate contactors, one of which produces rotation in one direction and the other ...
-
The drive is coupled to e. g. a CU320 multi-axis Control Unit through the CU Adapter CUA31 via a DRIVE-CLiQ interface. In this collection...
-
I. SCOPE This specification covers the requested Vector Control drive(s) design, operating, performance, testing, and support requirement...
-
MASTERDRIVES VC is Migrating to the Siemens SINAMICS Family of drives The Siemens Simovert MASTERDRIVES AC drive was introduced in 1... -
A regenerative drive contains the inherent capability and/or power semi-conductors to control the flow of power to and from the motor.
-
The variable voltage inverter (VVI) uses an SCR converter bridge to convert the incoming AC voltage into DC. The SCRs provide a means of ... -
"Corrosion Resistant" means that a device is so constructed, protected, or treated that corrosion will not exceed specified limi...
-
The flow of electrons. Current is measured in amperes, (commonly abbreviated as “amps”).
-
It is also possible to use SINAMICS S120 AC Drives in multi-axis applications. The drive is connected to a CU320 Control Unit via the DRIV...
-
Transformer having coils either dipped or cast in an epoxy resin.
0 comments:
Post a Comment