The control element of an SCR (silicon
controlled rectifier) commonly referred to as a
thyristor. When a small positive voltage is
applied to the gate momentarily, the SCR will
conduct current (when the anode is positive with
respect to the cathode of the SCR). Current
conduction will continue even after the gate
signal is removed.
Subscribe:
Popular Posts
-
A method of reversing motor rotation by the use of two separate contactors, one of which produces rotation in one direction and the other ...
-
The drive is coupled to e. g. a CU320 multi-axis Control Unit through the CU Adapter CUA31 via a DRIVE-CLiQ interface. In this collection...
-
I. SCOPE This specification covers the requested Vector Control drive(s) design, operating, performance, testing, and support requirement...
-
MASTERDRIVES VC is Migrating to the Siemens SINAMICS Family of drives The Siemens Simovert MASTERDRIVES AC drive was introduced in 1... -
The variable voltage inverter (VVI) uses an SCR converter bridge to convert the incoming AC voltage into DC. The SCRs provide a means of ... -
A regenerative drive contains the inherent capability and/or power semi-conductors to control the flow of power to and from the motor.
-
The smallest distinguishable increment into which a quantity can be divided (e.g. position or shaft speed). It is also the degree to which...
-
The flow of electrons. Current is measured in amperes, (commonly abbreviated as “amps”).
-
"Corrosion Resistant" means that a device is so constructed, protected, or treated that corrosion will not exceed specified limi...
-
Transformer having coils either dipped or cast in an epoxy resin.
0 comments:
Post a Comment